Special Edition Integrated Amplifier
Back
Enjoy a fully discrete two-stage design amplifier with separate power supplies for the pre-amplifier and power amplifier for signal purity and exceptional audio quality, everytime.
Audio purity reimagined
Engineered and extensively tuned by a team, drawing on more than 65 years of Marantz amplifier design knowledge.
The team of Sound Masters located in Japan and Europe didn’t stop their intensive work until they were absolutely certain they reached the height of quality worthy of the Marantz name.
Built to leverage enhancements, maintain the purest possible sound and supply the power needed to drive the most demanding speakers.
The result is a much more dynamic, accurate and detailed sound. Over the years, Marantz has developed different HDAM technology to fit the particular requirements of players and amplifiers. The PM-12SE uses the latest high-grade HDAM-SA3 technology, combined with optimized circuit design layout and carefully selected components, the PM-12SE ensures exceptional sound quality and performance.
Newly developed electric volume control uses the latest volume control IC to realize better channel separation, dynamic range and distortion-reduction, while retaining the operational feel of an analog volume control device. The amplifier employs new Marantz-designed electric volume control for high linearity and best-in-class channel separation.
| Channels | 2 |
| Current Feedback Topology | Yes |
| Full balanced circuitry architecture | No |
| Double Mono Power Amp construction | No |
| Phono EQ: Standard / Marantz Musical / Marantz Musical Premium | No / No / Yes |
| HDAM version | SA3, SA2 |
| Power Transformer: Toroidal / El | SMPS |
| High Grade Audio Components | No |
| Customised Components | No |
| Symmetric PCB Layout | No |
| Aluminium extrusion heat sink | Yes (Separate) |
| Copper Plated Chassis | No |
| Tri Tone Control (Bass / Mid / Treble) | No |
| Balance / Bass / Treble / Loudness | Yes / Yes / Yes / No |
| Linear Drive Power Supply | Yes (pre-amplifier stage) |
| Liniear volume control | Yes |
| BI-AMP and Multichannel option | Yes |
| Shottky diodes | Yes |
| Input buffer amp (all inputs / CD only) | No / No |
| System block shielding: Copper / metal / none | Yes / No / No |
| Double Layer Bottom Plate | Yes |
| Low Noise OELD display | Yes |
| Audio Inputs | 6 |
| Phono Input: MM / MC | Yes / Yes |
| Audio Outputs | 2 |
| Balanced In / Out | No / No |
| Pre-out / Main-in | No / No |
| Power Amp Direct IN | Yes |
| Gold Plated Cinch | Yes |
| Speaker A / B | No |
| Speaker Terminals | Marantz SPKT-100+ |
| Number of terminals | 2 |
| D-Bus | Yes |
| Floating Control Bus (3.5 mm mono jack x 2) | Yes |
| Headphone Out | Yes |
| Headphone Gain Control (low / mid / high) | No |
| Power Output (8 / 4 Ohm RMS) | 100 W / 200 W |
| Frequency response | 5 Hz-50kHz |
| Total Harmonic Distortion | 0.005% |
| Damping Factor | 500 |
| Input Sensitivity: MM | 2.3 mV / 39 kohm |
| Input Sensitivity: MC | 250 mV / 100 ohm |
| Signal to Noise Ratio: MM/MC | 88 / 75 dB |
| Input Sensitivity: High level | 220 mV / 13 kohm |
| Input Sensitivity: Balanced High level | No |
| Signal to Noise Ratio: High level | 107 dB(2V input/Rated output) |
| Input Sensitivity: Power Amp Direct IN | No |
| Signal to Noise Ratio: Power Amp Direct IN | No |
| Metal Front Panel | Yes |
| Power Consumption in W | 130 |
| Standby Consumption in W | 0.2 |
| Auto Power off | Yes |
| Detachable Power Cable | Yes |
| Remote Control | RC005PMSA |
| System Remote Function | Yes |
| Maximum Dimensions (W x D x H) in mm | 440 x 453 x 123 |
| Weight in kg | 15.3 |
| Carton Maximum Dimensions (W x D x H) in mm | 557 x 536 x 243 |
| Carton Weight (inc. product) in kg | 18.4 |
Find a Retailer Near You
Search by address or area to find
a retailer selling Marantz near you
